Description

These talk horns are made from polyethylene and come in bright colors. They are 19” overall in length, the large end is 4” ID and the small end is 7/8” ID.   Hose sold separately by the length needed.  This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Weight is .70 per pair.  Sold as a pair.

Colors:                       Blue, Green, Red and Yellow

 

This is for children 5 – 12 years old only. Adults should supervise children at all times. Do not allow children to use unsafely. Do not allow it to be used if damaged.


Testing Information1

TALK Phthalates

TALK Phthalates 2-1-11

IMPORTANT: Please read for important information. In this material we have tried to provide some requirements stated in the CPSC Handbooks, ASTM F2373-11, F1487-11 and F1148-09. However, we in no way intend for this to be a complete list of requirements. Also these publications are updated frequently with changes therefore, you should read these publications yourself to determine if any part or installation could prove a danger to a child.

To help keep children safe from harm, review installation and maintenance instructions before installing equipment. These are located in the description of every product on our website. www.jensenswing.com   Download and print these instructions and keep in a safe place. Our website also has a “Product Testing Information” page. All products are tested for lead, phthalates and tensile strength. You can also call us at 1-800-227-7529 for more information or see http://www.cpsc.gov/cpscpub/pubs/325.pdf.

Due to the thermo dynamics and lower heat transfer properties of plastics they insulate better and don’t transfer the heat as quickly. Because of these properties, the Consumer Product Safety Commission (CPSC) recommends plastic slides and plastic surfaces over bare metal.

Regardless of lower heat transfer properties, plastic play equipment can still become hot enough in extreme temperatures and direct sunlight to cause burns. As is the case with all playground equipment, parents and supervisors must monitor the children in their care, make certain that the equipment is appropriate for their age, and always check playground surfaces for excessive heat before allowing children to play.  For more information, contact IPEMA headquarters at www.communications@ipema.org or by calling 1‐717‐238‐1744.

Installation: Our parts are sold as either replacement parts or components of a set, unless you are buying our Metal Frame Set, therefore these parts need to be installed according to the sets installation instructions. If the installation instructions differ from ours please contact us at 800-227-7529.

Horns have two buttons at the bottom. The buttons should be pressed into a 1” tube and secured with a zip tie. Horn should then be secured to beam with zip ties so that horn is stable and cannot be removed or pose an entanglement. Entanglement may cause strangulation. Repeat process with second horn.

Maintenance: At beginning and end of each play season and once a month during play season, check plastic is not cut or cracking. Check that horn is securely attached to support and hose. Replace parts as needed.

Any damage from vandalism, abuse or misuse VOIDS all warranties.

Weight (lbs) 0.8
Dimensions (in) 12 × 12 × 6 in